Servo Drive C Type Hydraulic Press Machine Motor Pressing Machine
125T Capacity
buy C frame press machine,hydraulic press, mechnical press
machine,bending machine
characteristics:
the strainer hydraulic press has a C-type single arm structure and
is welded by steel plates.
After welding, it is tempered and aged to ensure that the fuselage
is never
deformed. Hydraulic system is located in the fuselage, beautiful
appearance, easy to operate.
Mainly used in metal products stretching, forming and pressing
processes.
Application area:
It can also be used in the pressing of powder metallurgy products,
the correction of shaft parts,
the press-fitting of sets of parts, and the shaping and trimming of
metal products. calibration table · imported PLC · manual or pedal
operation, cantilever hoist.
Performance:
This series of single-column hydraulic presses are
computer-optimized with an upright C-shaped
structure design. They have good rigidity and are welded with steel
plates. After welding, they are
tempered and aged to ensure that the fuselage will never be
deformed. The hydraulic system is
installed in the fuselage, with beautiful appearance, compact
structure and convenient operation.
This series of hydraulic presses is equipped with an independent
hydraulic and electrical control
system. It adopts button centralized control to realize both fixed
and constant pressure molding
processes. The machine stroke and pressure can be adjusted within
the specified range; the press
head adopts four-column guide with resistance Partial load
capacity.
Field of application: This series of hydraulic presses is
applicable to the correction process of shaft
parts, profiles, etc. It is applicable to the press-fitting of
shafts and sets of parts and the process of
drawing, bending, stamping, forming, blanking and other processes
of simple plate parts. General
powder and plastic products are pressed.
Work Environment :
Power Requirement: Three phase four wire, 380V, 50HZ ( as design
accepted)
Installation Field: Clean, low dust
Maximum Temperature :40ºC
Minimum Temperature: -5ºC
Relative Temperature:55—85%
Height: less than 1000M
Dual control can select to use:
Moveable pedestal height for comfort and ease of operation c/w dual
electric palm buttons
& extra emergency stop.
Movable single-hand pedal switch .
Optional touch screen terminals offer:
Data storage of mould(s) and manufacturing conditions.
Reduced mould replacement time and calibration, fabrication
requirements.
Programmable memory for working conditions, displays pressure,
stroke, spend data, etc;
one cycle process sequence.
Parameter:
| Model | Unit | Y41-63T | Y41-80T | Y41-100T | Y41-160T |
| Nominal Pressure | KN | 630 | 800 | 1000 | 1600 |
| Max.Pressure | Map | 24.3 | 25.8 | 25.8 | 25.8 |
| Max.Opening Height | mm | 630 | 720 | 800 | 1000 |
| Slide Stroke | mm | 500 | 500 | 500 | 500 |
| Down speed of slide | Mm/s | 50 | 50 | 36 | 25 |
| Return speed of the slide | mm | 90 | 90 | 90 | 65 |
| Throat depth | mm | 350 | 350 | 350 | 325 |
| Dimensions of Die Table | F.B. | mm | 550 | 650 | 650 | 650 |
| L.R. | mm | 850 | 800 | 800 | 800 |
| Worktable Height | mm | 710 | 710 | 730 | 750 |
| Work Table Opening Diameter | mm | 140 | 140 | 140 | 200 |
| Hydraulic cylinder diameter | mm | 180 | 200 | 220 | 280 |
| Motor Power | Kw | 7.5 | 7.5 | 7.5 | 11 |
Packing & shipping:
PVC film covered hydraulic press
Whole machine fixed in the container with steel rope,very safe
Wooden case or pallet or iron box
If have stock,can provide right now
If no stock,small machine delivery time 7-15days.Big machine
delivery time 25-40days.
Can give destination port best price or cost to the customer
factory
Our Service:
All machines have been tested by 48 hours before ship out.
All products have 2 year warranty.
Supported 24 hours online service. If any problems happen, our team
will do our
best to solve the problems.
If any component is damaged during guarantee time. we can send the
component to
the customer by DHL freely
Our Advantage:
MOQ: We can supply you the quantity you want.
OEM: We can produce the goods as per the customer requirement.
Service: We are much more concern for the on time delviery & quality
More information please contact us:
wxmachinery@163.com
WhatsApp:+86 13961729519
Skype: zouqicheng
QQ: 2308574039
PLC control hydraulic press machine 63T with servo motor
