Electric Kraftfomer 350 Sheet forming Machine Power Hammer Shrinker Stretcher

KRaftformer 350 Introduction :

The Kraftformer 350 is part of the medium-force Kraftformer range with motor drive.
Depending on the workpiece to be machined, the operator can adjust the number of working strokes to any value between 220 and 600 strokes per minute continuously. Low speeds are particularly suitable for shrinking, stretching and for straightening and precision finishing. Thanks to the high stroke rate, the machine is also widely used for doming (dishing) and planishing, boosting productivity. This Kraftformer is capable of machining steel sheets of up to 3 mm in thickness!
For our Kraftformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine).

Max. forming capacity
Steel 400 N/mm²: 3.0 mm
Aluminium 250 N/mm²: 4.0 mm
Inox 600 N/mm²: 2.0 mm

Summary:

Shrinking and stretching are indispensable operations in aircraft manufacturing, mainly

for correcting and adjusting of pressed parts of all sorts. The special machines and tooling

offer a highly efficient solution to assure precise fitting together of the individual parts.

Usage:

the sheet forming machine changes the traditional style of sheet forming by

manaually.reduce labour intensity and increase the productivity. it is widely

used to making palne. train.automobile,ship,electronic,light industry and etc.

it solved the technology that general dies are substituted for special dies.

Service And Maintenance:

The machine is of simple structure and does not require special maintenance.

However in order to prolong its working life please pay attention to the following item:

Lubricate all relevant points of the machine as per requirement of the lubrication

information plate, see figure below.

When stopping the machine be sure to push the selector button to “adjust” position,

step on foot switch S2 to lift the plunger for 1—2 seconds and then stop and switch

off power.

Before starting the machine be sure to clean up the work piece surfaces without

leaving a single spot of grease so as to make it easy for the shaping and prolong

the working life of dies.

Often check on the tension of the belt. If the machine is to lay idle for long period

of time the belt is to be loosened. Be sure to change belt in good time when it is

found damaged.

Emergency switch is not for stopping the machine in normal conditions. Do not use

it unless in emergency.

Technical Paramter:

Warranty And Service:
one year warranty for whole press.
all spare parts are available as we produce most of the parts in our factory.

it is easy to get the electric parts as all are international famous brands.
we can provide technical support via email, phone or video.
we can send out engineers for service, installation or training with reasonable additional cost.
English operation and maintenance manual is provided with the press.
All safety warning tags and control panels are in English

Machine Photo:

WUXI JINQIU MACHINERY CO.,LTD was founded in June 1969. it is located in No.99Qianluo road

Qianqiao town Huishan district Wuxi city. It is at Wuxi Vocation park. It mainly produces hydraulic press brake,

hydraulic shear, CNC sheet V grooving machine, allotype surface quick forming machine, CNC hydraulic turret

punching machine and other series products. It is one of the backbone enterprises in the domestic forging

industry with 40 years’ history.

The company covers an area of 62000 square meters with over 50000 square meters construction area.

It have advanced production equipments with imported large CNC gantry milling machine, imported large

CNC boring and milling machine, 100T carriageway and a series of iconic devices.

Company’s excellent design team can make personalized products according to the user’s demands which

to maximize customer value and optimize customer cost performance. Meanwhile, the company have always

stood in the forefront of technological innovation, continued to explore the “JQ”brand products widely and deeply,

and also attached great importance to the research cooperation. it has established long-term cooperative relations

with Jiangnan university, Nanjing university of Aeronautics and Astronautics, Jiangsu university, and also has set up

long-term stable cooperative relationship with the word’s leading multinational companies. Our hydraulic press brake

and shear machine have formed serialization

To met the customer’s different requirements.

Especially since 2002, the company has continued to increase investment in science and technology, our innovation

ability improves yearly through research staff’s innovation and hard work. We has received dozens of national invention

patents and utility model patents, won the provincial high tech enterprise in 2007, and obtained the innovation and reward

fund support from the national ministry of science and technology in 2011.

The company always adhere to quality system has access to the export product quality permit ISO 9000 international quality

system certification CE certification.

We sincerely hope to establish a close cooperation with domestic and foreign customers.

old factory area was founded since 1969 years that produced the hydraluic plate press brake mchine and hydraulic

sheet shearing machine

workshop view at old factory

we moved into new factory in 2008 years to process the CNC draulic press brake,CNC tandem press brake machine,

hydraulic shearing machine, CNC sheet V grooing machine,hydraulic iron worker, 3 roller plate rolling machine

and hydraulic press

machine body of plate press brake &shearing machine process workshop

parts machining workshop for hydraulic bending machine, hydraulic guillotine shear, sheet V groover

CNC press brake machines assembling workshop

workshop for producing the hydraluic sheet cutting machine

workshop use to assemble the CNC sheet V grooving machine

workshop use to assemble the heay press brake machine,light pole bending machine and CNC hydruilc tandem press brake

warehouse use to store the hydraulic swing beam shear and hydraulic guillotine shear

storeshouse use to store theNC press brake and CNC press brkae machine

our company hold the signing ceremony of sales tanks in second half of the year with all sales men on 2019. 6 30.

16x6300 shearing machine export to Vietnam